Introduction: Floppy Disk Iridium Camera Hack

For the past seven years, I've had a broken digital television camera lying around. IT is still competent to take pictures, but information technology is almost impossible to use on chronicle of a broken screen. The significant problem is that sometimes the menu will accidentally go turned along, and not being able to see the screen, I can't switch off the carte and take pictures (without removing the batteries to reset the camera). I've been trying to figure out what to do with this television camera American Samoa longish Eastern Samoa I can remember.

For a while I was considering converting it to a near IR television camera, but I was reluctant to make another one after having already made matchless for 62 Projects to Make with a Exsanguinous Figurer (p. 200). However, I denatured my mind about this when I learned that it was possible to utilise the material inside floppy disks as a visible incandescent filter (for viewing near IR lighted). This sounded really assuredness then I decided to give this a strain. Not single does this whole work, IT also adds another level of data processor reuse to the version demonstrated in the volume (arsenic it provides a direction to reuse floppy disks in addition to cameras).

It has been amusing going roughly shot pictures and discovering all of the interesting results when I upload the photos at house.

Step 1: Go Start out Stuff

You will need:

An obsolete digital camera
A diskette disk
A miniskirt screwdriver ready
Pins
Scissors
Glue


Please eminence that some of the links on this page contain Amazon affiliate links. This does not commute the price of any of the items for sale. However, I earn a small committee if you click on any of those links and buy anything. I reinvest this money into materials and tools for future day projects. If you would similar an jump suggestion for a supplier of any of the parts, please let me know.

Step 2: Make a Light Filter

You can make a overt diffusing screen using a the constructive inner most floppy disks.

Pull apart the floppy disk and be careful not to get your fingerprints on the plastic disk.

Conduct the disk and cut a small plastic square that is slightly larger than your CCD.

Step 3: Open the Case

Pioneer your camera case. Send your screws aside somewhere safe.

Step 4: Locate the Genus Lens Assembly

Once the suit is open, locate the lens assembly on the face of the camera.

Step out 5: Find the CCD

Carefully detach the lens assembly from the circuit table to find the CCD chip. Hard aside these screws someplace safe besides.

Step 6: Remove the IR Light Filter

The visible light filter is a thin piece of glaze over located either directly atop the CCD or behind the last lens of the assembly. It is easy to spot because it looks ruddy to purplish and changes discolour when it is turned.

Simply pick it emancipated with your fingers (being careful not to touch the CCD/lenses).

Your camera will now Lashkar-e-Taiba IR lighting through to the detector.

Step 7: Sequester Your Visible Light Filter

Place the visible radiation filter that you just successful over top of the CCD.

Using your pin, place a a few tiny drops of glue in each corner to hold IT in order.

Footmark 8: Put IT Back Together

When the glue has dried, reassemble the camera exploitation all of the screws that you set apart earlier.

Did you find this useful, fun, OR entertaining?
Follow @madeineuphoria to see my latest projects.

2 People Ready-made This Stick out!

Recommendations