Qnap Ts 653 Pro System Booting

Hi,

Merely today I've taken delivery of my make new TS-469 Pro.
Information technology was bought with 4x 4TB drives already fitted, so all I did was fit the additional two GB memory module (Integral IN3V2GNZNIX DDR3 1333MHz SODIMM), connect LAN and ability then fire it upward.
Later about 30 minutes, it is still sitting saying "SYSTEM BOOTING >>>>>>>".

Can someone assistance?

Cheers,
Kev.

Mail service by **schumaku** » Sat Jan xix, 2013 ane:28 am

Hi Kev,

Probably changed the some LAN port trunking configuration since the last kicking? 1 or two LAN cables continued to the switch? If there are two, give a try to disconnect one LAN, and power-upwardly again.

Regards,
-Kurt.

Mail by **Beer Hunter** » Sat Jan 19, 2013 1:29 am

Hi Kurt,

Information technology has never been booted earlier - this is literally the first fourth dimension it has been turned on.

Kev.

Post by **schumaku** » Sat Jan 19, 2013 1:42 am

Ability down, and requite a try to kicking without the SODIMM.

Using 1 LAN cablevision only?

Post past **Beer Hunter** » Sat Jan 19, 2013 one:45 am

schumaku wrote:Power down, and requite a try to kick without the SODIMM.

Using i LAN cable only?

Done and information technology works

Using a single LAN cable (at the moment) into NIC #1.
I deceit meet why this retentiveness should not be compatible - from a specification match it should exist perfectly fine.

Thank you,
Kev.

Mail by **Beer Hunter** » Sat Jan 19, 2013 1:47 am

It looks like it has shipped with FW V 3.7.iii. Could the latest iii.8.i help?

Kev.

Post past **schumaku** » Sat January xix, 2013 2:53 am

Kev,

Beer Hunter wrote:I cant come across why this memory should not be compatible - from a specification match it should be perfectly fine.

DIMM and SODIMM specs are mostly incomplete - there is more than than the DDR3 and the maximum frequency - all 2 GB modules we know every bit working in the QNAP ARM NAS (or Cantlet based Netbook for example) are single rank, sometimes advertised as 1Rx8.

Beer Hunter wrote:Information technology looks like it has shipped with FW Five 3.7.3. Could the latest 3.8.i help?

Regarding to the SODIMM? Unlikely, as this is an Intel thing. Not much QNAP can practice here I'm agape.

Thanks to Dr. Google and Integral having a reasonable Web site with more consummate datasheets: Integral IN3V2GNZNIX DDR3 1333MHz SODIMM unveils it's a dual rank (Rank: 2) SODIMM - PITA, this information is but visible in the datasheet.

If your supplier is selling Intrgral - the single rank variant is Integral IN3V2GNZBIX DDR3 1333MHz SODIMM if I'g not wrong.

Reagrds,
-Kurt.

Post by **Beer Hunter** » Sat Jan xix, 2013 3:27 am

Thanks very much for the info Kurt.
Club placed for the replacement.

Thanks,
Kev.

Post by **2000wolf** » Sun Jan 20, 2013 2:36 am

Beer Hunter wrote:It looks like it has shipped with FW 5 3.vii.3. Could the latest 3.8.1 help?

Kev.

Hi,

A little bit off topic..

My 50 ct to that question:

I would never ever attempt iii.8.0/3.8.ane due to several problems e.g. reported in that location

viewtopic.php?f=142&t=66651&first=210#p313901

Unless the upcomming 3.8.2 is not a considerable improvement I'll stay save with 3.7.3...

Mail service by **schumaku** » Sunday Jan 20, 2013 vii:41 pm

The thread yous are referencing came to life considering of the long-standing bug not addressed in 3.8.0 - but non because of any new issues probably related to v3.8.0. And then non updating does non change that much.

2000wolf wrote:Unless the upcomming iii.8.ii is not a considerable improvement I'll stay save with three.7.3...

...and expose an admin Spider web server vulnerable to XSS attacks to the internet for case? Not convinced non updating that smart.

Sorry, it appears some customs members converted the thread abroad from the constructive intention.

Post by **cbpagent72** » Tue February 26, 2013 1:26 pm

This may take been fixed by now merely I had the same effect with my new ts-269 pro and the solution was to remove the third party 2GB sick of ram. I found out what ram would piece of work without paying Qnap's ridiculous ram pricing, pm me and I will let you know.

Sent from my SPH-L900 using Tapatalk 2

Post past **schumaku** » Tue Feb 26, 2013 four:00 pm

cbpagent72 wrote:I found out what ram would work without paying Qnap's ridiculous ram pricing, pm me and I will allow you know.

that's not a secret ... post the information on the 2 GB SO-DIMM installed on your NAS.

Post past **cbpagent72** » Wednesday Feb 27, 2013 xi:28 am

I wasn't trying to be secretive, I but figured that Qnap did non want to have me undercut their overpriced RAM with lower priced options that role just besides. If you have a TSX69 Pro series NAS and would similar to add the boosted 2GB of RAM and not have the issue of the NAS not booting and running at 100% you need to get this RAM Kingston ValueRAM 2GB DDR3 1333MHz SODIMM Notebook Memory (KVR1333D3S8S9/2G) get only that part number every bit it is the just 1 that volition work.

Post by **brossyg** » Wed February 27, 2013 10:02 pm

I am experienceing exactly the aforementioned trouble later adding 2 gig of RAM. I have a TS-469 PRO. After much research, I purchased two Gig RAM to upgrade the unit to 3 Gig total. (2G Corsair CMS02GX3M1A1333C9). Later installing the RAM, the system would non boot (the LCD said "system booting" merely nothing ever happened, so I hooked up a monitor to the HDMI port and in that location was zero). Also, strangely, with the RAM added, the "esata" led was lit without anything in the esata port).

Does anyone know why this RAM causes the NAS non boot? It should piece of work fine.

Post by **cbpagent72** » Wed February 27, 2013 x:22 pm

The only thing that I have discovered is that it must have the same corporeality of modules on the front end and back of ram as the RAM that Qnap it'southward selling.

Look at how many of the positive reviewers are qnap owners:

http://www.amazon.com/Kingston-ValueRAM ... dp_product

Sent from my SPH-L900 using Tapatalk 2

Qnap Ts 653 Pro System Booting

Brand new TS-469 Pro "system booting" forever

Brand new TS-469 Pro "system booting" forever

Re: Brand new TS-469 Pro "system booting" forever

Re: Brand new TS-469 Pro "system booting" forever

Re: Make new TS-469 Pro "arrangement booting" forever

Re: Make new TS-469 Pro "system booting" forever

Re: Make new TS-469 Pro "organization booting" forever

Re: Make new TS-469 Pro "organisation booting" forever

Re: Make new TS-469 Pro "arrangement booting" forever

Re: Make new TS-469 Pro "system booting" forever

Re: Brand new TS-469 Pro "arrangement booting" forever

Re: Brand new TS-469 Pro "system booting" forever

Re: Make new TS-469 Pro

Re: Make new TS-469 Pro "system booting" forever

Re: Brand new TS-469 Pro "system booting" forever

Re: Brand new TS-469 Pro "arrangement booting" forever

0 Response to "Qnap Ts 653 Pro System Booting"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel